IPOE-171-60W Industrial 10/100/1000Mbps 802.3bt Ultra PoE++ Injector 60 Watts

IPOE-171-60W Industrial 10/100/1000Mbps 802.3bt Ultra PoE++ Injector 60 Watts

The Planet  IPOE-171-60W 1-Port Industrial 802.3bt Power over Ethernet Injector with a maximum of up to 60 watts of power output (50 ~ 53v PoE Output) over UTP Ethernet cable with an operating temperature of  -40 to +75 degrees C.

Designed specifically to meet the demand for growing higher power required network equipment such as:

- Lighting

- All-in-one touch PC

- Remote digital signage display

- Other network devices that need higher power to function.

The IPOE-171-60W delivers the Ethernet digital data with DC power over the twisted-pair cables as a 60-watt Power over Ethernet Injector, and the connected ultra Power over Ethernet splitter, the IPOE-173S, will separate the digital data and the power into three optional outputs (12V/24V DC) with distance up to 100 meters. 



- 2 x RJ45 interfaces

- 1-port Data + Power output

- 1-port Data input

- 1 x Terminal Block for master and remote power input. (Power Range: 48 ~ 56V DC redundant power)

- 1 x PoE mode (standard/legacy) DIP switch

Power over Ethernet

- Complies with IEEE 802.3at/bt PoE end-span/mid-span PSE 

- Supports PoE power up to 60 watts for PoE port

- Auto-detection of PoE IEEE 802.3af/at/bt equipment and devices from being damaged by incorrect installation

- Monitors the status of the total PoE usage in real time

- Remote power feeding up to 100m

- Auto-detection of DC input voltage



- IP30 slim-type metal case

 LED indicators for Power LED , PoE-in-Use LED and PoE Usage LED


Industrial Case and Installation

- Solid wall mount or DIN-rail mount installation

- Supports 6KV DC Ethernet ESD protection

- Minus -40 to 75 degrees C operating temperature


Hardware Specifications


- Input Port - 1 x RJ45 STP (Data In)

- Output Port 1 x RJ45 STP (PoE Data + Power Out(

- Input power 1 x Terminal Block

Network Cable

- Twisted-pair cable up to 100 meters (328ft)

- 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6

- 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6

- 1000BASE-T: 4-pair UTP Cat. 5e, 6

LED Indicators

- System: Power 1 (Green), Power 2 (Green), Fault (Red)

- PoE Port: PoE-in-Use x 1 (Amber)

- PoE Usage: PoE Usage x 3 (Amber)

Data Rate


Dimensions (W x D x H)

135 x 87.8 x 32 mm



Power Requirements

DC 48~56V, 2A max.

Unit Output Voltage

DC 45~53V

Power Consumption

75 watts max.

No. of devices that can be powered



DIN-rail kit or wall-mount ear


Provides one relay output for power failure


Relay current carry ability: 1A @ DC 24V

Enclosure IP30 slim-type metal case

Power over Ethernet

PoE Standard

IEEE 802.3at/bt PSE

PoE Power Output Budget

DC 50~53V / 60-watt PoE via 4-pair

PoE Power Output

- Max. 60W@1m cable

 Max. 51W@100m cable

PoE Power Supply Type

- End-span and  Mid-span

Power Pin Assignment

- Pair 1 End-span: 1/2 (-), 3/6 (+)

- Pair 2 Mid-span: 4/5 (+), 7/8 (-)

PoE mode

- Standard: To provide power to the PD device that follows the IEEE 802.3af/at/bt standard.

- Legacy: To provide power to the PD device that does not fully follow the IEEE 802.3af/at/bt standard. Besides, the Legacy mode supports PoH and Ultra PoE.

Standards Conformance

Standards Compliance

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3bt 4-pair Power over Ethernet Type 3

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3af Power over Ethernet

Regulatory Compliance

FCC Part 15 Class A, CE


Operating Temperature

Minus -40 ~ 75 degrees C

Storage Temperature

Minus -40 ~ 85 degrees C

Operating Humidity

5 ~ 90%, relative humidity, non-condensing

Storage Humidity

5 ~ 90%, relative humidity, non-condensing

Standard Accessories

Package Contents


User's manual

Wall-mount kit

Dust Cap

Installation of 802.3bt PoE Injector 

Due to the backward capability of IEEE 802.3af/at PoE standard, the IPOE-171-60W can directly connect with any IEEE 802.3af/at end-nodes, such as PTZ (Pan, Tilt & Zoom) speed dome IP cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points.

Installation of 802.3bt PoE Injector and Splitter 

For a place which is hard to find the power inlet, the IPOE-171-60W and IPOE-173S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input, such as PTZ network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points installed on the top of the building or used in enterprise office or home.

Extended Installation of IEEE 802.3bt Injector and PoE Network

Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and also the long-distance IP camera distribution, the IPOE-171-60W and PLANET PoE Extender, IPOE-E172, can be a quick and cost-effective option. In the simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the IPOE-171-60W. The IPOE-171-60W delivers PoE power over the first 100 meters to the PoE Extender over UTP cables, and then the PoE Extender forwards the Ethernet data and remaining PoE power to the remote PoE IP cameras. 

Tags: ipoe17160w